Suspended floor kit 60m2 ( 3 port )

Spreader Plate System ? Between Joists

The plate system will give an effective, even heat distribution whilst maintaining a low profile build up.
Insulation is installed between the joists and UFH pipes are embedded within the aluminium plates which are secured at either side to the joists.

A 16mm Pipe is connected to the manifold Flow port and pushed into place within the aluminium plate.

Description

This kit contains all items needed to install underfloor heating for joisted floors.

The underfloor heating pipes are to be laid between joists (400mm c/c), into aluminium spreader plates.

Our kit provides a temperature control of underfloor heating circuits using a thermostatic blending valve with circulating pump.

All our kits include an easy-fit pre-assembled manifold with pump and blending valve.

Kit includes:

- - 3port stainless steel manifold
  - Easy fit manifold control pack with Grundfos A rated pump
  - High limit safety sensor
  - Air vents
  - Fill & drain points
  - Isolation valves
  - 300m 16mm Pert-Al-Pert Underfloor heating pipe (Enough to cover 60m2 at 200mm c/c)
  - 200 16mm nail clips
  - 160 spreader plates
  - Instructions manual

Actuators are only required if you need to control zones separately, 1 per port would be required.

Please note wireless thermostats (Slimline RF & NeoAir) will need a wireless wiring centre (UH8-RF) and for all Neo controls to be controlled via app you will need to purchase a Neo Hub

Suspended floor kit 60m2 ( 3 port )

Spreader Plate System ? Between Joists

Description