In-Screed heating kit
The kit contains all items needed to install underfloor heating for solid floors.
The underfloor heating pipes are to be clipped onto floor insulation and covered with screed.
Our kit provides temperature control of underfloor heating circuits using thermostatic blending valve with circulating pump.
All our kits include an easy-fit pre-assembled manifold with pump and blending valve.
- Stainless Steel Manifold
- Easy fit manifold control pack with Grundfos A rated pump
- High limit safety sensor
- Air vents
- Fill & drain points
- Isolation valves
- 16mm Pert Underfloor heating pipe (Enough to lay pipes at 200mm c/c)
- Pipe conduit
- Edge insulation
- Staples (To fix pipe to floor insulation)
Actuators are only required if you need to control zones separately, 1 per port would be required.
Please note wireless thermostats (Slimline RF & NeoAir) will need a wireless wiring centre (UH8-RF) and for all Neo controls to be controlled via app you will need to purchase a Neo Hub.
Kits are to cover a maximum area of the floor area chosen.
Our 20m2 kits include a single room pumped manifold, so do not require a separate control pump pack and do not include isolation valves or high limit sensor.