Description
Low Profile Kits 100m2 ( 10 port )
This kit contains all items needed to install our low profile Retro18 overlay system.
An Ultra low profile fibre board the same height as a 5p coin (18mm). These panels are engineered gypsum with 60% recycled content board, this gives a strong and quickly installed dry screed system.
The overlay boards are to be laid onto a flat surface, they can either be screwed or glued to the surface beneath (Screws / adhesive not supplied).
This system can be installed over any existing concrete or wooden floor, this is generally installed over a 6mm Superfoil insulation giving the overall build up pf 24mm.
The boards are supplied as straights, and provided with end panels for the pipe returns. The boards have a high thermal conductivity so heating response times are quicker and energy use is reduced.
Any floor can be laid over the system following a thin layer of self-levelling compound (Not supplied), including carpet, vinyl, and linoleum. Laminates, real wood and engineered floors can be fitted as ?floating floors? directly over the panel.
Our Retro18 kit provides temperature control of underfloor heating circuits using thermostatic blending valve with circulating pump.
All lur kits include an easy-fit pre-assembled manifold with pump and blending valve.
Kit includes:
-
-
-
10port stainless steel manifold
-
Easy fit manifold control pack with Grundfos A rated pump
-
High limit safety sensor
-
Air vents
-
Fill & drain points
-
Isolation valves
-
800m 12mm Pert Underfloor heating pipe (Enough to cover up to 100m2 at 150mm c/c)
-
400 12mm nail clips
-
200 Retro18 boards & end returns
-
Instructions manual
-
-
Actuators are only required if you need to control zones separately, 1 per port would be required.
Please note wireless thermostats (Slimline RF & NeoAir) will need a wireless wiring centre (UH8-RF) and for all Neo controls to be controlled via app you will need to purchase a Neo Hub